Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What is the density of water kg/L, assuming its density is 1g/cm^3?
[ 1 Answers ]
What is the density of water kg/L, assuming its density is 1g/cm^3?
Density of petrol 0.84kg/l combustion 47 302kJ/kg wahat is the power
[ 1 Answers ]
If the fuel consumption of a car, travelling at a steady 60 mph is 20 mpg what is the power produced by the petrol being burnt in the engine ? (Assume that the density of petrol is 0.84 kg/l and the heat of combustion of petrol is 47 302 kJ/kg. I need the calculations. Thanks
Wiring double lighting switch, one source of power.
[ 0 Answers ]
I would like to wire a porch light to one switch and a ceiling rose to the other switch. I have three cables into the fitting wall box, each with a black wire, earth wire and red wire. Only one of the cables carries power on the red wire. I believe one of the cables is the switch wire...
Hampton Bay track lighting End Power Feed
[ 0 Answers ]
Folks, I bought a Hampton a 3 light Track Lighting Kit (724 491) and a Track Lighting End Power Feed with Cord and Switch to convert it for wall plug-in. The box for the End Power Feed says it works with EC and HB series track, and my lighting kit has EC76207 track. I have not been able to...
Track lighting with 2 power sources
[ 3 Answers ]
Can one long track-light rail be connected to 2 power sources? With two on/off switches - the rail passes by 2 hi-hat power sources. We thought we could then use either switch to turn the lights on/off. Also, how many pendant lights would be safe to use on 3 attached 8' rails? Each rail comes... View more questions Search
|