Ask Experts Questions for FREE Help !
Ask
    Petersons's Avatar
    Petersons Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 1, 2011, 12:52 PM
    Trane xr80 vent blockage
    We are having a blizzard here right now, and after troubleshooting, and seeing a continuous fast blinking code, I think the snow must best blocking our roof vent. Is this a common problem, or should I look farther?
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Feb 1, 2011, 03:17 PM

    If you have a blocked vent(s) there is only one thing to do and you know what that is. It happens. It is much more common on systems that aren't installed correctly than on well done ones.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xr80 9 blinks [ 0 Answers ]

Trane XR80 blows cold air. Inducer motor comes on, glow bar glows for few seconds than goes out and inducer motor shuts off. Immidiatly after the main blower comes on and blows cold air. Will blow until main switch is turned off. Error code is 9 blinks. Replaced the glow bar and same...

Trane xr80 no code [ 1 Answers ]

Trane xr80 is blowing cold air. When first turned on, it flashed a red light once and then the light goes off.

Trane Xr80 codes [ 1 Answers ]

I have a Trane Xr80 the prevoius owners did not leave a manual and the indicator light blinks four times in succession pauses and repeats. If anyone can tell me what this means I would greatly appreciate it. Thanks

Trane XR80 Furnace [ 1 Answers ]

My Trane XR80 furnace is only blowing cold air. The diagnostic light is bllinking 6 times which, I think, means the 115 volt polarity is reversed. Is this something I can fix or do I need a repairman?

View more questions Search