Check out some similar questions!
Electrical partial-power-loss power to the outlet on one side and the ground
[ 2 Answers ]
I have partial-power-loss as a result of a heater and christmas tree plugged in the same line in my home. The problem I 'm having is that each outlet that was affected still has 115V on ether side and ground , is this the result of a hot attaching itself to ground somewhere in my wall? And how...
Outside outlet has no power
[ 2 Answers ]
Outside outlet no longer has power. No circuit breaker was tripped so we cannot tell which breaker is for this outlet. How would I locate the breaker since it does not have any power. We have a circuit breaker locator but the outlet needs to have power. What do I do??
No power to an outlet
[ 1 Answers ]
I have an office in my basement, It all was fine and out of the blue, I used the microwave (which I do every day) and the entire west end of the basement went dead. NO popping or any warning. I checked the breaker and it was not tripped. So I reset it anyway and still no power to the outlet. Any...
Running two switches from ine power source through junction box
[ 1 Answers ]
I have come up against a problem with some electrical in my house. The previous owners did some very "inventive" things and I am trying to re-wire some lighting in my kitchen. Here's the situation. I have power coming into a junction box (not the best I know, but old house). The power is to...
Wire Motor for 220 outlet Power from 110 power
[ 1 Answers ]
I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments View more questions Search
Add your answer here.
|