Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Grounding my Service Panel
[ 13 Answers ]
I have a 100amp Service Panel which seems adequate for my small 1500 sq' house. I got a quote for a new 200amp panel installed for $2700 so think I'll wait until I expand the house. However, I am converting my plumbing to plastic supply lines and will not have metal to attach the ground to except...
Generator Sub Panel & Grounding
[ 2 Answers ]
I have a Generac 17kw generator that includes a 16 circuit panel and automatic transfer switch. My question is about the ground wires. I know to keep the sub-panel (16 circuit General transfer switch) ground and neutral isolated. But, the Generac transfer switch includes neutral and hot...
Grounding connection in service panel
[ 3 Answers ]
I'm presently having problems with electrical in floor heat GFCI tripping in various circuits. This is a new installation. I can't measure any grounds on any of these circuits. I checked the main panel and I can't find a bonding strap or conductor between the neutral and the grounding bar in the...
Electrical grounding
[ 12 Answers ]
An additio has been added to an older home. In the process the long ground wire has been coiled up and laid by the copper ground rod. So, the one end is not connected to anything. I'm gettng a lot of static on the radios... can I connect this wire to any nearby pipe, etc. Your advise will be...
Grounding a Panel and Meter Box
[ 4 Answers ]
I am installing 200 amp electrical service in a new residence using 2/0 SE cable. The main breakers are in the panel. Since it is a GE panel, I have added grounding bars which did not come installed in the panel. The neutrals will all go to the neutral bars and the grounds to the grounding bars.... View more questions Search
|