Not your question?
Ask your question
View similar questions
Check out some similar questions!
Track lighting question
[ 2 Answers ]
Hopefully an easy one for you guys: I am replacing track lighting in my house (built in '97). The new track has black, white and green wires. The exisiting junction box in the ceiling has a yellow and a white wire with no ground. Should I wire yellow-->black and white-->white? Can I ground...
Hampton Bay Track Lighting
[ 1 Answers ]
I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...
Hampton bay track lighting
[ 1 Answers ]
We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.
Track lighting question
[ 3 Answers ]
Hello. In my kitchen, there is an old track lighting fixture that does not function. I'm assuming that this worked at one time, but not while I've lived in the house. I am interested in replacing it with a new fixture. There are electrical connections in the ceiling where the old fixture is but...
Hampton Bay Track Lighting
[ 1 Answers ]
I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working. View more questions Search
|