Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Recessed Lighting
[ 8 Answers ]
Need help with Recessed Lighting. The included picture is an electrical diagram I used in wiring up some recessed lighting. The switches used are 600w Dimmer Switches with push on/off feature. The problem is that on the center switch the dimming feature burns out consistently but I am still able...
Suspended Ceiling / Recessed lighting
[ 5 Answers ]
I have a "problem" suspended ceiling. I bought a house almost a year ago, and I knew that at some point the suspended ceiling in the basement would become a frustratiion. The finished room is about 10x21 feet. It is a USG ceiling with 2x4 USG ceiling tiles. The issue is that the ceiling is hung...
Recessed lights
[ 3 Answers ]
I am putting can lights in the basement. I can't decied whether or not to put drywall on the ceiling or this new drop ceiling its made of pvc it attaches right to the floor joists and the tiles clip in. you lose 1 inch. The confusing part is how do I put the can in to make up that inch or will the...
Recessed lights
[ 7 Answers ]
Good morning everyone. Started project installing 4 recessed lights in family room. I am running a dedicated circuit just for the lights, composed of 12/2 with ground 20amp breaker And 1 switch My question is the switch is a single pole rated at 15 amp, is this switch safe and OK to use,...
Recessed cans and I/C rating, what does it really mean?
[ 7 Answers ]
Hello again all, and thanks in advance for any advice you can offer. I installed 8 recessed (6") cans in my attic ceiling. they are rated for insulation contact (I/C) . they are installed in a 2x4 ceiling. i plan to lay insulation perpindicular/over the top of the 2x4's. and then also insulate... View more questions Search
|