Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Hampton bay track lighting kit
[ 1 Answers ]
I have installed two sets of hampton bay track lighting model hd529093 in my den. And they are controlled by 2 light swithes. I am trying to install a dimmer on them. I have lutron dimmer model fae1v500m muti-location 500w andfa603adtl for the second switch. I am not able to make lights work with...
Hampton Bay Track Lighting
[ 1 Answers ]
I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...
Hampton bay track lighting
[ 1 Answers ]
We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.
Hampton Bay Track Lighting
[ 1 Answers ]
I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working. View more questions Search
|