Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pressure/bladder tank losing pressure?
[ 11 Answers ]
Well, I have asked some questions about my plumbing before. So I am calling on you guys once again. I have a 52 gallon pressure tank/bladder tank made by wellsaver. I turn the water on and have good pressure for a few minutes then it basically goes dead with no pressure. I recently posted questions...
Should I replace my pressure tank?
[ 7 Answers ]
13-year-old house with well & septic. A pipe in the incoming water line failed last fall and I made a temporary replacement; time for permanent repair now. While I'm at it, I want to increase water pressure so flushing a toilet doesn't kill flow during a shower. Well pump cuts in at 40 PSI and...
How do you size a home for ac
[ 1 Answers ]
I know how to use the formula of .40 per square foot on a regular home and .45 per square foot on a drafty home for heat, but what formula do you use to calculate air conditioning per square feet. Also how do you know how many cfm's you need per room when you are calculating what size boot you need...
Tank Pressure vs Pump Cut Out Pressure for Well
[ 1 Answers ]
I am trying to increase my water system pressure to the minimum required 40 PSI to feed my reverse osmosis drinking water filter. However, the 33 gallon pressure tank for my well pump system says it is pre-charged at 30 PSI and that the cut in pressure for my pump should be set equal to that 30...
New pressure tank?
[ 1 Answers ]
I recently had my well pump replaced. Ever since, the pump kicks in after a gallon or two of water use. I called the well pump installer immediately when we noticed the problem (which did not exist until he came out to replace the pump), but he won't show up to check it out. Kidnapping him and... View more questions Search
|