Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New 250 volt circuit, no grounding bar in main panel
[ 4 Answers ]
Hi, I have searched for this answer but I can't find a clear answer for a rookie. I am adding a 250v/20amp circuit to my main panel for a window air conditioner. I have a newer Murray main panel that was installed by an electrician, but its an old house and all the outlets are 2 prong type. So I...
Ground bar vs. Neutral bar
[ 1 Answers ]
What is the difference? I understand the neutral goes on the neutral bar and the same for the ground wires but if you were to check continuity between the neutral bar and ground bar they are connected. Can you explain?
Why is the grounding and neutral bus bar connected in the sub panel?
[ 1 Answers ]
I had an electrician come in and install a new sub panel in my house and wire up my kitchen. When he finished, I took it from there. Now that I have the rest of the house wired, its time to connect it all to the sub panel. Both the neutral bus bar and the ground bus bar (2 separate buses) seem to...
Ground bar in sub panel
[ 1 Answers ]
Hi, I want to wire a 240 Volt sub panel in my garage and I have the 2 live wires, the neutral and a ground wire coming in . In the sub panel, there is a insulated neutral bar and the 2 connectors for the live wires. There is a little piece of metal with an instruction for grounding which...
Ground and neutral bar
[ 2 Answers ]
I'm installing a 4 wire, 50 AMP GFCI for my hot tub. My question is at my main breaker for the house where I'm taking power from, which bar is neutral and which bar is ground, or does it matter? Thanks Fred View more questions Search
|