Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Install ceiling fan w / light kit
[ 4 Answers ]
I am installing a ceiling fan w / light kit .the fan has a black,white, blue and green wires. The ceiling has black,white ,red , green and ground .there has never been a light installed there b/4. the wall has a separate switch for the light and fan. How do I wire it??
Light kit install for a ceiling fan
[ 3 Answers ]
I have a Hampton Bay fan and Harbor Breeze light kit. The fan is already installed. I just bought the light kit and I found the blue and white light kit wires in a plastic bag in the fan. However, they are not connected to anything in the fan. What must I do to connect them to the fan after I have...
Connecting two wires from light kit pull chain switch 2 wire to light kit for fan
[ 6 Answers ]
I would like advise on how to attach the two black wires on the light kit pull chain switch to the light kit on the ceiling fan. I see there are two unattached wires on the light kit, one is black and the other is white. Are these the correct wires to attach the pull chain to? If so, how do I...
Ceiling Fan Install, Not Using Included Light Kit
[ 1 Answers ]
Hi! We're installing a new ceiling fan that comes with a light. However, we do not wish to install the light; we're just going to use the coverplate. My question is, do we CAP OFF the BLUE wire or do we attach it to the BLACK wire, which controls the fan? Is either option OK? Thanks for...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new... View more questions Search
|