Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
200 amp panel feeding a 100 amp panel roughly 130' away
[ 7 Answers ]
Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek:
Condo/Apt. New 100 amp service - BX wire size?
[ 12 Answers ]
Hi All! I currently have an old 40 amp service in my pre-war condo. We are allowed to run BX securely attached for a new service. The distance is 250 feet. I am looking to get a 100 amp service. What size BX cable should be used for this? Do they make BX large enough for a 250 foot 100 amp...
100 amp sub-panel
[ 3 Answers ]
Can I put a 100 amp sub-panel in my attic? My attic has pull down stairs and is unfinished. I was hoping I can put a sub in my attic to make it easier for numerous runs I have to do on the second floor. I want to be up to code and do not want any issues with homeowners insurance. Thanks, mike
Secondary 100 Amp Feeder Wire Size
[ 3 Answers ]
Hello to all. I am running a feeder wire in 2" conduit from my 100 amp breaker in my house panel to my 100 amp garage panel approximately 160' away. I am wondering if #1-#1-#2 Aluminum is sufficient with a #6 Copper ground. Thanks for the help.
Wire size in a 100 amp breaker
[ 1 Answers ]
I was wondering if a 2/0 wire will fit in a siemens 100 breaker? Thanks for your help View more questions Search
|