Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3 Wire Junction Box to 4 Wire Stove
[ 1 Answers ]
Hello, I just bought a 30" Kenmore Stove which has a 4-wire connection. The wall does not have an outlet, it has a 3-wire (Black, White and GND). I am not 100% sure how to make this connection because I haven't fooled with 220 in very long time. I am looking for some help and advice on...
Can I cap off white junction box wire
[ 1 Answers ]
I have an older chandelier with 2 unlabeled wire (a single double wire which has been split in two.) The junction box has a black, white, and red wire in addition to a copper wire. I attached the copper wire to the green screw, but I was not the one who removed the previous chandelier and do not...
No red wire in junction box
[ 3 Answers ]
Installing a timer forutside light. Box only has white, black, green. I know black to black white to white; but timer also has a red wire; I have no red wire in box. What do I connect the red wire from timer to? Right now I just capped it off, but on manual I cannot turn the light on
How do I splice #6 wire in a junction box?
[ 5 Answers ]
How do I splice #6 wire in a junction box ?
Junction box for #2 aluminum wire
[ 3 Answers ]
I need to join a new 100A feed on #2 aluminum wire to an existing #2 wire running from the panel. So this is actually #2 alum triplex in both cases plus a #8 bare copper ground. The junction will take place in an access panel in the wall where the two PVC conduits meet. What size junction box do... View more questions Search
|