Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can a three lamp ballast be run with only one fluorescent bulb?
[ 1 Answers ]
We have a system of linear, fluorescent lights that use three bulb ballasts (we believe these are from the late 1970s). Three bulbs is way too bright for our needs, and I understand that we can't simply sub out the 15W bulbs because they must match the ballast. We have attempted to run the lights...
Can I run a 2 lamp fixture with a 4 lamp ballast?
[ 1 Answers ]
I recently bought some Lithonia fixtres from HD with GESB electronic ballasts. They don't Physically hum but do cause a lot of interference with FM reception. Since I do a lot Of FM tuner alignments, these were unacceptable. I phoned Lithonia (actually Accupro - the 1-800 number is right on the...
Can you run a 250w hps lamp in a fitting with a 400w ballast
[ 1 Answers ]
Can you run a 250w hps lamp in a fitting with a 400w ballast
Fluorescent lamp vs ballast
[ 2 Answers ]
I have a fluorescent ceiling fixture with two circular lamps and two separate ballasts. One of the lamps is not longer lighting. Is there any way to determine which element (lamp or ballast) is defective? I have used a continuity tester to check out incandescent lamps but am not sure how to do... View more questions Search
|