Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sub Panel Wiring
[ 4 Answers ]
I am installing new 60Amp subpanel. I ran #6 ( romex type ), copper stranded cable to it from main panel. The cable has 4 wires: 1 black, 1 red, 1 white, 1 green. . My question relates to connecting this cable to this new sub panel. There is no place to connect green wire. How / Where do I...
Wiring from my house panel to my pole barn panel
[ 1 Answers ]
I am going to be wiring my pole barn up soon and just need some help on the type of wire to use. In my house I have a 200 AMP service and plan on running a 100 AMP feeder from that panel to my subpanel in the barn. (Just under 100 Feet) I am going to run a 6 gauge ground, two 4 gauge...
Wiring to sub-panel.
[ 1 Answers ]
Will this work properly if when wiring a sub-panel for 240v can one of the 3 aluminum 4 gauge wires in the pvc underground pipe be used as the neutral wire if that wire is bare? I intend to attach the ground bus at the sub-panel to a ground rod using 6 gauge bare copper wire.
Sub panel wiring
[ 1 Answers ]
I have a 50 amp GFCI breaker in my subpanel box to be used by a hot tub. I noticed that the breaker has a post for the neutral wire load. Is it necessary to use this post or can my load neutral wire be connected to the neutral bus (same as breaker pigtail and supply neutral)?
Sub panel 40 amp wiring
[ 1 Answers ]
I have a 70 amp sub panel. I'm trying to figure out how to wire in a 40amp breaker in the sub from the panel in my house. I have two hot wires coming in to separate lugs, one neutral, but the breaker itself has one trip/reset lever yet has two screws on the bottom of the breaker;one on each side.... View more questions Search
|