Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a 50amp breaker to my 100amp service.
[ 1 Answers ]
Actually, I am not sure what the incoming service is. The Master Circuit Breaker for the box is 100amp. I want to put in an electric oven/range. It requires a 50amp breaker be used. My service panel is full, but I do have a 30 amp breaker that I can pull out.(It is for baseboard heaters that...
Change 100AMP service to 200AMP service?
[ 2 Answers ]
What are the steps need to change from 100 AMP service to 200AMP service?
4 wire 100amp service box but only 3 wires?
[ 2 Answers ]
:confused: 4 wire 100amp service box but only 3 wires? I replaced my water heater with a tankless water heater. My service box is set up for hot, hot, neutral, and appliance ground for 220 watt hook up. But the water heater only has 3 wires, hot hot, and "Bare wire" ground. I currently have the...
4 wire 100amp service box but only 3 wires?
[ 1 Answers ]
I replaced my water heater with a tankless water heater. My service box is set up for hot, hot, neutral, and appliance ground for 220 watt hook up. But the water heater only has 3 wires, hot hot, and "Bare wire" ground. I currently have the water heater connected as, hot, hot, to breaker, and the...
Upgrading from 100amp service to 200 amp service
[ 1 Answers ]
I have a 1994 model double wide home, and would like to change my 100 amp service to 200 amp service. ( I want to go to electric heat) I have a disconnect at the house after the meter and it say 200amp. Is the wiring from there to my breaker box able to handle 200 amp service, and if not how do I... View more questions Search
|