Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring 2- 12volt lights to one switch
[ 3 Answers ]
I would to know how to wire 2- 12volt lights to one switch So I can switch one light on but the second light is off then be able to switch the second + first light on together
Wiring multible lights to one switch
[ 5 Answers ]
I want to wire a light to a light to a switch and if possible a receptacle at end
Consistent Switch Loop Wiring
[ 7 Answers ]
TK - Strat- KISS-Labman - et al.. This question only applies to overhead sourced switched loops. 14/2 to 14/2 - I have been taught that for a two wire switch loop, the Black from the Source goes to the Black to the Switch. White from the switch is recoded with tape and connected as the...
Wiring one switch to operate two lights
[ 4 Answers ]
I'm remodelling my bathroom and want to add a light above the vanity that operates off the same existing switch that operates the overhead light. The power current comes from the ceiling fixture to the switch. I added the vanity light along the cable on its way to the switch. However, now...
Wiring one switch for multiple lights
[ 2 Answers ]
I understand the wiring for a single switch for a single light but what do I do with multiple lights on the one switch without making the whole circuit run off that switch. There are other outlets that need constant power on the same line as the two lights. View more questions Search
|