Search:

Ive got a 91 toyota 4x4 with locking hubs, I got all new inner and outer bearings and new upper and lower ball joints from my mechanic because it was making a grinding noise on the front driver side....

I have replaced the electronic ignition module the coil the fuel filter and fuel pump on my 90 chevy 1500 truck with a 350 tbi all within a year but for some reason it still only starts when it wants...

I have a 94 yukon with a 350tbi in it. The question is or problem is when I try to start it I have to use startind fluid otherwise it will just keep turnind over. Its almost like I have to prime it...

1992 gmc 1500 long bed with 305 2 wheel drive front disc brakes rear drum. I just got this truck and every time I come to a complete stop then let of my brakes I hear and feel a clunk like the rear...

SORRY just asked this question but it's the abs light and the brake light not the check engine light it also pulls to the driver side when its cold like that... I have a 1995 dodge diesal 2500.Every...

I have a 1995 dodge diesal 2500.Every time its cold(20 below or colder)the abs and check engine light both come on at about 40 to 45 miles per hour. I can't seem to figure it out, I also keep it in a...

I live in Alaska and I need my high school diploma. Does anyone know of any schools that are online and accredited so I can get my high school diploma and get a union job.

Im looking to do my high school diploma online. I found out that the Northwest Association of Accredited Schools is one of the six regional accredited agencys but the only one that can be recognized...

I have a 1990 chevy 350 with overdrive transmission, every time it shifts it seems to shake or slip inside the trans what's going on what should I do.

I have a 94 dodge cummings 2500 I bought newback in the day,but the last couple months it keeps shifting in and out of overdrive other than that it shifys good what gives.

I live in the woods of Alaska with no schools around me. Do you know any place I can get a high school diplomia online or GED that Alaska accepts and has its accreditations.

I have a 1990 Chevy truck with a 350tbi. I have replaced the ignition module twice within a year period. Now today it will not start again, is there something that could cause the ignition module to...

What is the diffrence between the vortec 350 and the chevy 350 can you put a vortec in a older truck that had a 350tbi (1994)

Thanks I will see how everything works out for me

I just put a 2000 vortec 350 moter in a 1990 chevy truck with a TBI.I got a new intake, do I have to do anymore mods to make this set up work and run top shape thanks

I have a 90 Chevy truck that starts when it wants and that's not always. It gets spark but what else could it be it's a brand new motor what else should I replace. It's a 350 vortec with a throttle...

I just got my vortec 350 rebuilt and it runs great but every time I do a Brodie it seams to stall out and I have to restart it in the middle of the road what's going on

the truck is a 1990 with TBI and auto trans does it even have a powertrain management computer and my new 2006 chevy has no prolblem burning off the tires how are you going to get your tires warm...

I have around 800 miles on my new vortec 350 motor so when I go to power brake and smoke the tires I here the lifters knock or a gas ping noise what could cause this.

I have a stock stereo in my car lately I can here the engine rpms there the radio and some times hard popping static I looked at the wires can't find anything wrong

I have just got a 1990 Chevy truck with a 2000 vortec motor it has a new intake but the same throttle body my question is every time I step on the gas it bogs like the old carb motors sometimes did...

No this is not a test its questions to do with one of are work sites JR NCO your not doing my homework

I have a commercial kitchen equipped with three 3 kW ovens a 20 Kw water heater and a 3 kW deep fryer what would be the demand load for all of these items also what would be the definition of demand...

Suppose your working in a one-family dwelling that supplied with 120/240V service. The home has a 240-volt heat pump rated at 25 amp's the size of the home is 2200 square feet also with10 kW range a...

I am stumped on this I need to now the total net load and the total load service for a 1800 square foot home with 11 kW range and a 6 kW 240 V dryer I have looked at the back of the NEC and I need to...

I have a 2004 gmc truck but my heater stops working when the engine rpms runs below 1500 rpms(idaling)the fan works great but blows cold air :eek:

What are magnetic fields measured in of ?

Suppose that your working in a building that has three 3 kW ovens a 20 kW water heater and a 3 kW deep fryer all in a commercial kitchen what would be the demand load for all of these I looked in...

Does the NEC allow a built in dishwasher to be connected to existing small appliance circuits and which section of the NEC covers this situation

Suppose your working in a home that has a 15 kW oven that operates on 240 V the oven is a branch circuit by itself what is the demand load for this circuit and what size TW copper conductor should be...

What is the total net load for a home with 1800 square feet the appliances in the home are an 11 kW range and a 6 kW 240 V dryer also what would be the total load service in amps for the same home...

I have 18-3 coming out of the wall the problem is I have a new digital thermostat with no directions and I did not remove the old t-stat how do I find out what wire is what I live in a apartment with...