Ask Experts Questions for FREE Help !
Ask
    bolles's Avatar
    bolles Posts: 1, Reputation: 1
    New Member
     
    #1

    May 29, 2009, 10:29 AM
    Reprogramming a Hunter Ceiling Fan Remote Control
    How do I reprogram a Hunter ceiling fan remote control #85095-01?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    May 29, 2009, 05:44 PM

    Generally speaking you can't reprogram remotes, you can only set the dip switches. They should match the ones on the fan. See:

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Fan/Remote Control Installation [ 2 Answers ]

Hello All, First-time home owner attempting to install a Hunter fan w/ Hunter remote. Having an issue with understanding the wiring set-up. Please help!! Ceiling originally had light installed with: (1) White wire (in use) (1) Yellow wire (in use) (1) Yellow wire (not in use)

Hunter ceiling fan Remote control replacement. [ 22 Answers ]

This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...

Hunter ceiling fan remote control replacement [ 5 Answers ]

I was given a replacement remote/reciever at Lowe's. Some kid told me it would work. I ohmed out the motor which has two windings (pink to yellow and red to grey). I paralelled the two windings with the new receiver output and neutral. The fan doesn't run as fast as it did before. The winding ohmed...

Hunter remote control programming [ 4 Answers ]

I just purchased a home that has 2 hunter fans. The remote control has part # 85095-01. I need to know how to program it to the fan. I can hear the fan click but it doesn't engage and the light has to be turned on by unscrewing the light bulb. I know this is a programming thing because I used to be...


View more questions Search