Ask Experts Questions for FREE Help !
Ask
    whoppa98's Avatar
    whoppa98 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 12, 2008, 02:44 PM
    No power to outlets and lights
    I have been replacing outlets for looks and just did the bathroom. I changed GFI there to and had no power to any on that breaker, I changed the breaker and still no power. I tested power coming from breakers and have 120 v. Please someone help?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Oct 13, 2008, 04:46 AM

    Connect in coming power to the "Line" screws. Press reset and test buttons. If GFI outlet does not trip on test or rest set, you may have a defective outlet.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No volatage to outlets and lights [ 3 Answers ]

I was trying to find a breaker to a circuit and took the switch wires and touch them together it cause the lights to go off,but the breaker did not trip and now I can't get the lights back on also the main breaker was arcing as I turn it on and off

A few outlets, lights not working, though not all are bad on each circuit [ 1 Answers ]

I recently had a situation where the condo above me was flooded, which subsequently leaked down into my kitchen walls, ceiling, etc. Obvious damage, but not major at first glance. At first, all of my electricity in apartment worked fine. The first that went was an outlet that the disaster relief...

Outlets and Lights on one circuit [ 2 Answers ]

Ok, so we have a small electric project we are running. We will have 1 electric outlet and then two light fixtures. All of this is in an attic space. The outlets will be used on a regular basis (always on) for a projector and an electric screen. (Both of these are very low in draw) From the outlet,...

Breaker shows power but no power to outlets [ 1 Answers ]

I have a breaker that is showing power coming out but all outets and equipment on this circuit are dead how do I find the problem?

Mixing outlets & lights on same circuit [ 3 Answers ]

Is their any reason that electric outlets and electric lights can not be on the same circuit?


View more questions Search