Add your answer here.
Check out some similar questions!
Celing fan pull switch [ 8 Answers ]
I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...
Hunter Ergonimic Ceiling Fan w/ Remote - Wiring to single switch [ 2 Answers ]
We just installed a Hunter Ergonomic Ceiling Fan with a remote. It is powered by a single light switch and our intention was to always have the light switch "on" and use the remote control to turn it off or on. When we turn the light switch on, the light comes on and all fan functions can be...
Ceiling fan remote to 3way switch [ 1 Answers ]
How do you hook up a handheld fan remote to a 3 way switch? There are a million wire ac in, what does it all mean?
Celing Fan Light Switch - 2 Leads [ 1 Answers ]
How do I change the switch on my Hunter fan light? It's not an old unit, but the chain sticks and refuses to release when you pull on it. I bought a replacement switch from Hunter, without instructions. The old switch has two black wires going into the plastic and metal case, with no visible means...
3 wire celing fan switch [ 1 Answers ]
I have just bought a 3 wire celing fan switch and I can't figure out how to wire it. It is a 3 speed fan and it has what appears to be a transformer with blue and black wires going from the old switch to the transformer. One black wire is coming out of the transformer to the plug. The new switch...
View more Electrical & Lighting questions Search