Ask Experts Questions for FREE Help !
Ask
    sandpeople's Avatar
    sandpeople Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 7, 2007, 10:04 AM
    Junction box on an 1999 Oakwood doublewide
    Does anyone happen to know how or where to find the junction box on a doublewide? We have lost power to our lights and outlets on our front wall to our house. We had a electircian come and take a look but he said that unless we can find out where the junction box is he can't fix the problem. I have searched the web trying to find a way to obtrain the electrical floor plan for our house but haven't been able find anything. We are hoping someone on here can help us!

    Thanks in advance

    Jason
    nauticalstar420's Avatar
    nauticalstar420 Posts: 3,699, Reputation: 423
    Ultra Member
     
    #2

    Jul 7, 2007, 10:14 AM
    My husband is an electrician. He says you would probably have to cut through the insulation under the floor to get to the junction box. He also says that every mobile home is different, so he wouldn't be able to tell you where under the floor it is, but at least there's a start :)
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jul 7, 2007, 11:59 AM
    I would remove panel cover and verify all breakers have voltage out. If all good, then
    I would look underneath, along center, where 2 halves meet. Look for access. 4 screws may cover. Would also look in any closets or places to hide junction box, also along center line.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric junction box [ 1 Answers ]

How do you wire a 220 volt line through a junction box into a 220 volt plug in for a stove? Please provode me with a schematic of the wiring procedure. Thanks

Junction box as a cover? [ 3 Answers ]

I have a junction box currently that I need to add wiring to. It has the opening and internal clamps to add two more wires but this would put the box over its legal limit of wires in the box. The box is in a location that can be gotten at without removing any part of the building. The box is...

Junction Box Fill [ 5 Answers ]

I'm trying to find what the fill capacity on electrical junction boxes are. I found this chart The thing that is stumping me is do you count grounds or not? For example, the specific instance that has me looking is that I have a 4x4x1 1/4 box, with 4 12/2 cables in it. If you don't...

Junction box question [ 2 Answers ]

Hello. I have a quick junction box question. Is there a limitation to the amount of wires I can safely join in a junction box? If so, what is it and are there regulations to what size box I can use? Thank you. I would like the have 8 wires (neglecting ground) in one junction box (1 in / 3 out)....

Junction Box size [ 2 Answers ]

I have and oven with 10/3 mc cable attached. I am going to splice this to a 10/3 romex cable that I pulled from the sub panel. Is a metal 3" deep single gang box big enough? How many cubic inches do I need? Thank you


View more questions Search