 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
IRRITROL Sprinkler controller wiring
I have a old hardie rain dail sprinkler. It has two wiring strips in the controller. The one on the top has the 24v power supply wiring and two other wires. The bottom strip has has the wires for each valve.
The new irriitrol replacement doesn't seem to have the same wiring. Is the common wire the two going to the upper strip. Can anyone tell/help me with the wiring. That is going from a Hardie to the Irritrol. Thks:) |
||||
Check out some similar questions!
Hi How do I wire an intermatic 220 volt sprinkler timer? Thanks
I purchased a home (9 yrs ago) where the previous owner had the sprinkler system's control valves buried in the ground with 'plastic' covers. The man who does repairs on the system came to check on zone 1 and in doing so said zone 3 selenoid wire broke off and he had to replace it - charged $25 +....
I recently bought a house with this sprinkler system. The transformer 2 wires are connected to the 24 VA and the colored sprinkler wires are connected. The main source of Power has been disconnected. Where should I connect the power wires?:confused: <moved from Lawn & Garden>
I have a O General controller that I want to replace. The unit is strictly for Air con ( No Heating) . I have three wires coming out from the Wall. Black , Red and White , but I am not sure how to hook them up to a new hunter programmable thermostat , which has G,RH, RC, Y/O , W/B and Y1 The...
I have 2 switches, the first one controlling the fan light and the second the fan motor. How would I wire a Harbor Breeze Wall controller(2Black and 1Ground wires) to contol the fan. The receiver and the hand-remote are working the issue is only with wiring the wall controller. The existing wiring...
View more questions Search
Add your answer here.
|
