Ask Experts Questions for FREE Help !
Ask
    partner1's Avatar
    partner1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2010, 08:37 AM
    Intelectron motion detector manual
    Intelectron Motion Detector Light model BC8300/BC8310. Manual overide does not come on
    At wall switch. Per the manual I have the overide switch in the "OFF" position. Can anyone
    Help me?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Oct 15, 2010, 08:56 AM

    I will try to locate manual, but would think the manual override may need to be switched on?
    Does light work at all?
    partner1's Avatar
    partner1 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 15, 2010, 08:59 AM

    All features of the light work otherwise. Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Four way switches with motion detector [ 10 Answers ]

I have some hall lights with 4 switches. Is it possible to add a motion detector switch as one of the switches and have it turn the power on and off while still using the other three switches for power on and off?

Intelectron motion detecting Light Goes On In The Day [ 2 Answers ]

Intelectron motion detecting Light Goes On In The Day, stays on for 1 min as per the setting. The light sensor on the bottom is not covered

Ask motion detector question [ 2 Answers ]

I am trying to control my walkway lights with motion sensor. I am using 3 walkway lights (each 12V / 18 W, bulb model # 1141) powered by Malibu 100 Watt Power Pack (from HomeDepot - ...

Motion detector installation? [ 4 Answers ]

I am trying to install a motion detector in my house, but when I look at the siring diagram, I can' figure it out. The detector has three wires, 2 black and one green. I understand the green is the ground and one black is the hot and the other black is the neutral, but what I don't understand is...

Motion Detector Wiring [ 1 Answers ]

I am a novice when it comes to electrical wiring. I purchased a IPP-15-LW leviton motion sensor switch to replace a current switch in my garage. The switch is one of two switches that are in the garage controlling the same group of lights (I think this is called a 3-way switch?) and it can be...

View more questions Search