Ask Experts Questions for FREE Help !
Ask
    simssp's Avatar
    simssp Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2010, 08:22 AM
    Intelectron motion detecting Light Goes On In The Day
    Intelectron motion detecting Light Goes On In The Day, stays on for 1 min as per the setting. The light sensor on the bottom is not covered
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 7, 2010, 03:05 PM

    If the light sensor is in tree or heavy shadow shade and the sensitivity is set high, this will happen. If you can't move the sensor, try moving the sensitivity switch toward "less". Sometimes you have to use a remote sensor wired to the light through conduit if the shade is very heavy.
    simssp's Avatar
    simssp Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 7, 2010, 03:15 PM
    I'll turn the sensitivity down to minimum right now. The lights are under the eaves for the garage with the light sensor facing down. Not in a dark area
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Design a motion detecting circuit [ 3 Answers ]

How can I construct a basic circuit that will detect the movement of a small animal, such as a mouse. I am thinking along the lines of the motion, or infrared detecting devices that are used in "no touch" towel dispensers, hand dryers, and a number of other devices these days. I would like the...

How do I adjust the light on my Hampton bay motion sensor light (P5993-50? [ 0 Answers ]

How do I adjust the light on my Hampton bay tiffany collection one-light motion sensor fixture (p5993-50)? Also, where can I get an owner's manual for this light?

I had my period for 5 days stopped for a day light bleeding next day could I be pregnant? [ 2 Answers ]

I was 3 days late for my . An then when it started it was heavy during the day then very light or nothing at all at night and only lasted 5 days, on the sixth day I didn't have any bleeding at all, the next morning my boyfriend and I had normal, nothing different protected sex like we usually do...

Motion light [ 2 Answers ]

I would like to convert my 110v motion light into 220v motion light. Can I rewire it or change something to make it 220v?

Leviton PR150 Motion LIght Control Flickers light instead of keeping them on [ 4 Answers ]

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

View more questions Search