Ask Experts Questions for FREE Help !
Ask
    grjack's Avatar
    grjack Posts: 15, Reputation: 1
    New Member
     
    #1

    Dec 4, 2007, 06:49 AM
    Installing electric Space Heater - do I need heat resist. Wire?
    I'm installing a 240v, 1500 W (6.25 A) electric space heater made by:
    Zonal Energy Efficient Heater - Electric Wall, Fan, and Baseboard Heaters

    I read their installation instructions - no requirements fro wire are spelled out.
    Can I run regular 12/2 romex to this or do I need some type of special heat
    Resistant romex?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Dec 4, 2007, 10:40 AM
    Romex will be fine. They don't tell you what type of building wiring to use, as there are several types available and subject to local codes.
    grjack's Avatar
    grjack Posts: 15, Reputation: 1
    New Member
     
    #3

    Dec 4, 2007, 11:50 AM
    Once again - thanks for your input- I appreciate the help

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat for 240V, 5000 Watt electric space heater [ 6 Answers ]

I have a garage electric heater (without thermostat) which I want to wire to a thermostat. The heater is rated 240 volt, 5000 Watt. First, can you suggest any particular thermostat that will handle this line load (I've only been able to find ones that handle up to approx. 3800 Watts) and, lastly,...

Electric space heater [ 1 Answers ]

What size fuses do I use for a 480 volt space heater with it own fan that draws 24 amps

Installing New Thermostat from 6 wire to 5 wire [ 2 Answers ]

I'm installing a new 5 wire progammable Hunter Thermostat. I have all but one of my wires accounted for. I RH and RC jumped together with R, W2 to W, Y to Y, and G to G. I do not need the "C" common blue wire as the new unit is battery operated, so I have this wire taped off. I have an orange...

What size wire for electric heater? [ 2 Answers ]

I'm hoping someone can help with this question. We are installing an electric wall furnace, 240 volt, 38 amp, 9.2kwh. I was told by the guy at the hardware store to use size 8 wire. The instructions (?? ) that come with the unit don't sat anywhere what size is to be used! Is size 8 wire correct?...

Installing a signal wire for a heat pump change over valve [ 2 Answers ]

My wife and I just bought a house and I was thrilled when I saw that the outside unit was a heat pump (a Goodman ck36-1b model, to be exact). Well, today was the first day that we were to run the heat, and I noticed that the furnace kicked on immediately. "Strange," I thought, "doesn't the...


View more questions Search