Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Circuit breaker installation
[ 5 Answers ]
Hello, I'm attempting to do something that I've never tried before, Install a breaker switch. I'm using 12 Gauge wire and a 20 amp breaker switch. I definitely need some guidance in this. Is there anybody out there who can help me?
Gfi breaker
[ 1 Answers ]
I have an outdoor pond. I think that my electrical connection got wet and shorted out. My question is, I changed out all the receptacles on the gfi circuit and only two work. Is it possible that the breaker is bad and does not supply all of the circuits now??
Double breaker?
[ 3 Answers ]
Hi, I have recently put in a new 200 amp. Service and had to install a large J-box to extend the wiring to the new location, (not very far). My problem is that I have a new 2-pole 40 amp. Breaker for the "A/C", and a 15 amp. Breaker for the "furnace". My confussion is that either of these breakers...
Breaker
[ 5 Answers ]
I have low voltage landscape lighting plugged into an outside outlet. The total watts is about 500 and I am using a 600 watt transformer. The outlet is a GFI outlet and has a dedicated 20 amp breaker. Nothing else is on this breaker. Sometimes the breaker will trip. I have replaced the...
15 amp breaker
[ 5 Answers ]
Rewiring my kitchen, I have refrigerator, stove with electronic ignition, exhaust hood, and a microwave, and a duplex plug. Wondering if too much power for 15 amp breaker. Thanks for any info. View more questions Search
|