Ask Experts Questions for FREE Help !
Ask
    jeffplay's Avatar
    jeffplay Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 29, 2008, 01:59 PM
    INstall 200 amp disconnect
    From my 200 amp meter socket to my 200 amp disconnect, does the wires go to the top of the 200 amp breaker or the bottom or does it matter?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Apr 29, 2008, 05:19 PM
    Unless it is labeled LINE and LOAD, it does not matter. LINE is typically on top though.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to disconnect wiring [ 2 Answers ]

I have a phone jack in my dining room and one in my kitchen. Each jack works properly. My problem is there is also an old wire coming out from beneath the jack cover and is nailed across my kitchen countertop to the other jack and under its cover. I need to remove the wire in order to have a new...

Spa disconnect [ 1 Answers ]

Does the spa box count as the disconnect or does there need to be one somewhere else? I am building a 12'x12' gazebo and the spa box will be on the outside. The wiring is going to come up through the concrete in steel conduit. To add a disconnect somewhere else would put it somewhere in the...

Beyond quick disconnect [ 1 Answers ]

I am in the process of installing conduit and wiring for a spa. The approximate distance will be 150 feet from breaker to spa. I will locate the GFI/service/emergancy disconnect 10 feet from the spa itself. At the base of the spa will be a duplex junction box for the hard wire connections via a...

BATCH files silent install or unassisted install? [ 3 Answers ]

Hello, :confused: I have many application's that I install at my place of employment. These applications have been packaged into a .exe, I currently install these apps VIA Batch files as there are many prerequisites required to install before installing the application itself i.e.. Oracle 9 etc....

Another disconnect question. [ 5 Answers ]

Greetings all... I've spent the last few minutes reading several questions about main disconnect panels/breakers outside the home ( between the meter and breaker box ). I had been thinking about inquiring about having such a device installed here in my NC home. You see, my house is very old,...


View more questions Search