Ask Experts Questions for FREE Help !
Ask
    marczub's Avatar
    marczub Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2008, 09:25 AM
    Hunter fan switch and capacitor wiring connections
    I need to reconnect a 3-speed fsn switch and a 10/5/5/5 mf capacitor to a Hunter Fan. I foolishly did not record the connections before disconnecting the switch and cap. I found a replacement switch at Home Depot and, from what I found on the web, the connections are L=black, 1=gray, 2=brown, 3=green. Where does the cap's second gray wire go? I cannot find a wiring diagram anywhere on the internet.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 10, 2008, 09:50 PM
    What model Hunter fan is?

    Try contacting Hunter they might have diagrams. Hunter Fan

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New wiring for 2 lights and celing fan with hunter 3way switch [ 8 Answers ]

I have 3 rooms on one circuit, 20 amp. Lights only. 2 rooms only have light fixture in ceiling and mstr. Bdrm has new ceiling fan with light kit. Ran new romex 12/2 wiring from circuit panel to junction box. From junction box went to each room. Got room1 working by running whitewire (hot) to bottom...

Wiring Coleman Capacitor [ 10 Answers ]

Ok... here we go. I just changed to Condenser Fan motor on my Coleman AC unit. With the new motor I was told to change the capacitor. The old capacitor is a 3.5uf and the new 7.5uf 370vac. My problem is: The old capacitor is round appox 3" tall. Has 3 places for wires. On the left are 2...

Hunter Ergonimic Ceiling Fan w/ Remote - Wiring to single switch [ 2 Answers ]

We just installed a Hunter Ergonomic Ceiling Fan with a remote. It is powered by a single light switch and our intention was to always have the light switch "on" and use the remote control to turn it off or on. When we turn the light switch on, the light comes on and all fan functions can be...

A/c float switch wiring connections [ 1 Answers ]

While working in my attic, I accidentally disconnected one of the eletrical leads from the float switch in my condenser drip pan. Both leads are small gauge, plain black insulate wiring. One lead is still connected to the wiring panel on the side of the hvac unit. The other lead that I kicked...

View more questions Search