Ask Experts Questions for FREE Help !
Ask
    vgullett's Avatar
    vgullett Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 11, 2009, 07:32 PM
    Hunter ceiling fan with light fixture wiring diagram
    I have a Hunter ceiling fan, model 25466 with a light kit. While wiring the light fixture some of the wires were pulled loose. I need to find out what wires go with which ones to fix it. Going into the fan are three wires, one black, one white, and one black and white striped. On the bottom of the fan going into the light fixture are one white, one black, one yellow, one pink, one gray, one red, and the black and white striped wire.
    Connected to the reverse switch are two yellow and two pink wires and one white. Connected to the three way pull chain switch are the one black wire from the fan, as well as one gray, one brown and one green wire that also goes to the 5uF resistor (large) and from this resistor there is another gray wire that looks to be wired to the other gray wire that goes into the reverse switch. There is another resistor that has one red and one white wire coming from it. There were four white wires connected together but one of these pulled loose from something inside. How can I figure out which wire the white wire connects to?

    The next question would be, which wires do the black and white wire from the light fixture hook to?:eek:
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jan 12, 2009, 09:55 PM

    All the white wires connect together.

    Light connects to the whites, and to the black/white striped wire.
    gabbyone1's Avatar
    gabbyone1 Posts: 1, Reputation: 1
    New Member
     
    #3

    Nov 9, 2011, 10:35 AM
    My light in my hunter does not work. My husband pulled it apart and now I need to know how to wire it back together. Do you have a picture on how to wire it back,or a vidio? THANK YOU FOR YOUR HELP
    randall massey's Avatar
    randall massey Posts: 1, Reputation: 1
    New Member
     
    #4

    Jul 26, 2012, 08:52 AM
    I have a hunter model 25572. Wirring pulled loose during move.Out the bottom I have Blk,Wht,Grey,yellow,red coming out of the fan and a larger what wire ending out the top(probably common) I also have a blk and stipped Blk coming down through the fan top to bottom. I figure the blk is power(hot) Whish wires go to the switch( appears to be three speed) and which goes to the capacitor? Thanks for your help.
    swtredhen's Avatar
    swtredhen Posts: 1, Reputation: 1
    New Member
     
    #5

    Nov 17, 2012, 08:50 AM
    I have an older hunter fan.. probably 30-35 years old. The light stopped working and I went in and had to re connect some wires that had burned away due to too large wattage in the bulb. The fan was working wonderfully,just the light was affected. I reconnected the wires and now the light works great,but the fan is no longer working. I could have not wired it back correctly,but can not find any diagrams that have the same kind of wiring that this fan has. I have 2 black wires coming from the fan,and two white wires coming from the fan.I have 3 black wires coming from the light kit and one white... Can someone please tel me how to reconnect them to make both the light and the fan work? Thanking you in advance!
    [email protected]
    thor304th's Avatar
    thor304th Posts: 2, Reputation: 1
    New Member
     
    #6

    Nov 24, 2013, 04:58 PM
    Hi. I hooked up my light kit. White to white and black to black with whie line. They were wrapped and said to light kit. Lights did not work. But there is 2 red wires hooked together. Any sugestions

Not your question? Ask your question View similar questions

 

Add your answer here.


Check out some similar questions!

Help with wiring a HUNTER Ceiling Fan and Light Control [ 16 Answers ]

I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...

Wiring light fixture to ceiling fan outlet with 2 switches [ 7 Answers ]

I searched but couldn't find this exact question... I have replaced a ceiling fan/light with a light fixture. The ceiling fan/light was connected to a single set of black, white and red wires as well as a ground wire. The ceiling fan was controlled by switches in 2 locations. One location...

How to install a remote to a hunter ceiling fan/light fixture with 4 black, 4 white, [ 4 Answers ]

Install a hunter remote to a hunter ceiling fan/light fixture

Wiring a Hunter ceiling fan with light [ 3 Answers ]

I am having trouble wiring a Hunter ceiling fan with light. In the ceiling, I have a black, white, bronze and red. In the fan I have two greens, white, black and a black/grey wire. Which go with which? Thanks. K

Ceiling Fan 4 light fixture wiring [ 5 Answers ]

I have a ceiling fan with a 4 light fixture I need to know how to wire the light switch. I have one white wire, one black wire, and one green wire available. The green wire is labeled lights. Thanks in advance.


View more questions Search