 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to wire new bath fan and keep old light switch above mirror?
I put in a new Broan # 761bn in my bathroom, my problem is I can't figure out how to wire it properly to keep the new fan which also has a light on it, the plug in switch next to the light switch and the light above the vanity mirror? Please help
|
||||
Check out some similar questions!
I have one room. On 1 side of the room I have a ceiling fan/light and on the other side I have just a light. Now I'm trying to get my ceiling/light on one switch and just my other light on the other switch. Help me out
We just bought a Kendal remote control ceiling fan and light for the upper hall. We want the light to work only on a wall switch, so we can turn the light off either upstairs or downstairs. We want the fan to work by remote. How do we wire this?
Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?
I am installing a ceiling fan with a light. I have power at the box and need to know how to wire for the switches. I want to control the fan and the light separately. Can I run a 14/3 + ground to the switch box by sharing a hot lead and using the other two wires for the switch?
Hi, I need a little help. I want the bath fan and light to opperate on one switch. I ran the power to the light and have the fan connected at the light. Then I ran the switch to the light.my problem is when I turn the light on, the light is very dim and the fan is at half speed. What am I doing...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
