Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring light fixture to ceiling fan outlet with 2 switches
[ 7 Answers ]
I searched but couldn't find this exact question... I have replaced a ceiling fan/light with a light fixture. The ceiling fan/light was connected to a single set of black, white and red wires as well as a ground wire. The ceiling fan was controlled by switches in 2 locations. One location...
Bathroom fan/light fixture and other light
[ 2 Answers ]
I am remodeling my bathroom and am having trouble with the wiring of the switches. Existing wiring controlled an fan switch, separate switch for the light, a switch for vanity light and an outlet. I want to eliminate the outlet so need to wire the three switches separely in a 3 gang box. The wiring...
Wire Motor for 220 outlet Power from 110 power
[ 1 Answers ]
I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments
Changed from fan to light fixture and now light will not shut off
[ 1 Answers ]
Today I tried to replace a ceiling fan to a light fixture. I connected the black to black white to white and copper to ground. I have a red wire that I don't know what goes to. The light now will not turn off. Should the red wire be connected to something? View more questions Search
|