4 Answers
Not your question? Ask your question View similar questions
Add your answer here.Check out some similar questions! Changing light fixture- wires ( red, black and white?) [ 14 Answers ] Just changed light fixture. When I put the power back on the light worked but the switch on the wall will not shut the light off. In the ceiling there was 3 wires. One black,one white and one red. The fixture that I put up has only black, white and ground. So I attached the black to black,... Hunter Ceiling Fan/Light w/remote installation [ 11 Answers ] Hello, I am have a hunter ceiling fan and I am having trouble installing this correctly. From the ceiling of the wall I have 4 wires (Red/ Black/ White/ and bare Copper). From the fan there is are only 3 (Black/ White / Green). Please assist me with installing this fan. I have tripped the... Replacing a ceiling fan with fixture that only has black & white wires [ 3 Answers ] I am replacing a ceiling fan and there is a red, black and white wire in the ceiling box. It appears the switch is connected to the black (top connection) & red (bottom connection) on the light switch. The ceiling fixture only has a black & white wires. When I connect black to black and white... Hunter fan remote install [ 2 Answers ] I am trying to install a hunter fan remote to a hunter fan. Nothing works. The remote has a black (hot) line, white (common) line, fan in, light in and common lines. Coming from the fan itself are a black line, black with white stripe, white and green line (ground). From the ceiling I... Harbor Breze Fan w/remote & light fixture [ 1 Answers ] I just got the fan second hand and the remote does not turn the light completely off. The fan part works great. I did purchase another remote. Hope this will work. I also need a bulb that goes into that light and my Lowe's store could not cross it for me. Do you have instructions on how to... View more Electrical & Lighting questions Search |