Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   How do I wire a remote controlled ceiling fan, with light? (https://www.askmehelpdesk.com/showthread.php?t=296520)

  • Dec 28, 2008, 08:17 PM
    papperbob1
    How do I wire a remote controlled ceiling fan, with light?
    What does ac-n and ac-l on the wires mean in electrical connections of a remote control ceiling fan with a light? I have lost the wiring instructions for a ceiling fan with light. The markings on the wires are (black - motor), (blue - light), and (white - com). There are also 2 other wires on the control to be wired up, 1st one is (red) with ac-l printed on it and the other is (white) with ac-n printed on it. I have no idea where these two wires should connect. . Isure would appreciate help with this problem. Thanks very much in advance
  • Dec 28, 2008, 09:18 PM
    KISS

    Ac-n is AC-Neutral or white
    Ac-l is AC-LINE or black

    Basically power.

    The "black" will likely be part of a switch loop, so it could be two black wires. The line side is switched. Power is usually in the fixture. The wires run from the switch are usually what & black.

    Own a multimeter?
  • Dec 28, 2008, 11:31 PM
    ceilingfanrepair

    Kiss is right. Those two wires connect to your two wires from the ceiling.

    Ceiling fan wiring - Ceiling Fans N More

  • All times are GMT -7. The time now is 03:32 AM.