Excuse me, I did look at the code book as is suggested in your Sticky. The NFPA may answer this question, but I am not knowledgeable enough to recognize it: Our offices are upstairs in an older (renovated home) building with modern wiring. We have 4 computers, 3 printers, and miscellaneous with...

Hello, :confused: I have many application's that I install at my place of employment. These applications have been packaged into a .exe, I currently install these apps VIA Batch files as there are many prerequisites required to install before installing the application itself i.e.. Oracle 9 etc....

Hi, I've been finishing my basement and I added a few 15A breakers One room has 8 outlets in series with the first starting about 6 feet from the main panel. There is currently no load on this outlets. When installing the drywall I accidentally shorted the outlet closest to the panel. It...

I just install circuit breaker 240 v ,but when I use the meter it can only read 120 v on each pole when I check both pole I don't see any thing in the meter,:eek: why is this happen Thanks

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!