Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to hook up 2 water heater in series? Electric
[ 3 Answers ]
Due to space I have 2/ 20 gallon eletic how do I pipe them?
How to connect red and white wires to a thermostat with G, why, W, RH and RC wires?
[ 0 Answers ]
I'm trying to change a Honeywell RTH 6400, to a LUX TX 500
Burnt red wire to the heating element to hot water heater. (electric).
[ 2 Answers ]
Burnt red wire to the heating element. Cover has been off after I replaced the heating element 18 months ago. I did have this problem about two months ago when it appeared that the red and black wire touched each other . There was the burnt smell and melting. I cut off the burnt parts and...
Two wires one red one white trying to hook up a honeywell CT31
[ 4 Answers ]
I just bought a new thermostat cause the one I had was an old mercury one. I bought a Honeywell CT31. I look at the insructions it tells me to look at the setting markers on the old thermostat, but there are none. It also says do not pay attention to the colors of the wires. I did not know what...
Do I need four wires for electric hot water heater
[ 1 Answers ]
:) I have an electric hot water heater (240v) that presently has 3 wires (2 hot and ground). I'm in new construction and think the code requires 4 wire ( 2 hot, neutral and ground) but I don't see anywhere on the hot water heater to hook the neutral except to the ground and this doesn't seem... View more questions Search
|