Add your answer here.
Check out some similar questions!
Hampton bay ceiling fan lights & fan not operating [ 16 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling [ 3 Answers ]
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
Installed Ceiling Fan: Fan Works/Lights Quit Working [ 3 Answers ]
I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...
Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]
Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?
Hanging a ceiling fan/light [ 5 Answers ]
I have a room approx 25 x 30 floor space with a 24' high ceiling over half of it. My painter said there is a ton of heat being trapped up there so I bought 2 ceiling fans and want to know at what height they should be installed. And should one be higher than the other. They are 52" each.
View more Electrical & Lighting questions Search