Ask Experts Questions for FREE Help !
Ask
    dcortez's Avatar
    dcortez Posts: 1, Reputation: 1
    New Member
     
    #1

    May 13, 2007, 02:56 PM
    Hampton Bay Ceiling Fan ac-552
    Hampton bay ac-552 (sku#474-628) "kk"

    I have this fan on the ceiling and it needs to be removed. Previous owner put it there.
    I can not figure out how to remove it. Amazing! I have removed the blades But there are no screws or obvious ways to remove it! Where can I get the owner's manual? Can anyone help?

    Thanks,

    Doug:mad:
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    May 15, 2007, 05:15 PM
    There is a decorative ring, against the ceiling, that covers the screws. Twist it to remove it.
    hshouses's Avatar
    hshouses Posts: 1, Reputation: 1
    New Member
     
    #3

    Mar 12, 2013, 01:55 PM
    Which way do you turn it to remove the decorative ring?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #4

    Mar 12, 2013, 07:37 PM
    Twist to the left and it will drop down, you may have to pry a bit. Underneath are 4 small screws for the canopy removal.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #5

    Mar 12, 2013, 07:40 PM
    [QUOTE=ma0641;3417781]Twist to the left and it will drop down, you may have to pry a bit. Underneath are 4 small screws for the canopy removal.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hamilton Bay Model AC 552 ceiling fan speed switch replacement [ 6 Answers ]

My pull chain broke on my fan speed switch. I replaced the switch with a 3-4 wire switch. I matches the black, brown. Grey and purlpe wire with the same connect number on the new switch that they had on the old switch. I believe this is a three speed fan. The fan now runs but it can not be turned...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Model AC-552 [ 9 Answers ]

Anyone familiar with the Hamton Bay model AC-552? It has a 4-inch drop and the light fixture is 4 bulbs. I'd post a picture if I knew how on this site. If you are familiar with it can you kindly tell me if this fan is adaptable to flush mount . I'd appreciat it.

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?


View more questions Search