Add your answer here.
Check out some similar questions!
Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 13 Answers ]
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hamilton Bay Model AC 552 ceiling fan speed switch repalcement [ 5 Answers ]
My pull chain broke on my fan speed switch. I replaced the switch with a 3-4 wire switch. I matches the black, brown. Grey and purlpe wire with the same connect number on the new switch that they had on the old switch. I believe this is a three speed fan. The fan now runs but it can not be turned...
Hampton bay ceiling fan lights & fan not operating [ 16 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton bay ceiling fan-light works-fan doesn't [ 4 Answers ]
I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...
Hampton Bay Remote Ceiling Fan - light works - no fan [ 1 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
View more Electrical & Lighting questions Search