Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cable to use from meter base to breaker box
[ 16 Answers ]
I am moving my current breaker box to the outside of my house. It will sit approimatly 1 foot from my meter base, I will need about 10 feet of cable to make the run (I think). I just need to know what kind of cable I need to use. And if I need to have it in a conduit. I have look in the NEC,...
PVC for service to meter base
[ 1 Answers ]
Installing a 200A meter base for overhead service on a shed/workshop building. Could or should I use PVC 2" through roof eve to weather head? Will PVC be strong enough to support elec. Cable from pole?
Outdoor electrical circuit 400' from main meter box
[ 3 Answers ]
I want to add two circiuts to a junction box , apx 400' from a pass through electrical box on my property, I had put in underground 1 1/4 cunduit with a pull box every 100 feet when the house was built. What size cable should be used for this, it will need to handle 2- 20 amp circuits
Wire from manufactured home to meter base
[ 1 Answers ]
What size wire do you use from the breaker box in manufactured home to the meter base. I was told there were 4 wires involved - I understand the 4th wire is a ground, but where does connect in breaker box and to the meter base?
Meter Base with disconnect and A/C Breakers
[ 3 Answers ]
My meter base will have an outside 200amp disconnect. It will also have three 30amp breakers to feed the A/C units located a few feet from the meter. There will also be a 200amp main panel located in the basement. My question is if my disconnect outside is a 200amp and I have three 30amp... View more questions Search
|