View Poll Results:
Check out some similar questions!
Furnace with Generator problem?
[ 27 Answers ]
I have a York Two-Stage Deluxe Diamond (PDU) furnace that I have recently wired to a 6 CKT transfer switch (Reliance Controls) to use with my Coleman 6250 (5000watt) gas generator. All my ckts. Work well with the generator connected, except the furnace. I switched ckts on the transfer switch-no...
Generator Problem
[ 17 Answers ]
Hello, My problem is this,I was given a new portable generator by my father-in-law.He bought a new generator from Max tool.com and it turned out to be no good (the one he gave me). I set up his generator to backfeed his service(residential application) in times for when the power goes...
Portable generator
[ 2 Answers ]
The question I have is that my generator is only putting out about 100v. I would like to know if this will cause damage to anything that is running off the generator. Correct me if I am wrong but don't most appliances run between 110 and 120. I was told that the output of the generator could vary...
Portable Generator
[ 6 Answers ]
I am interested in purchasing a 5000 to 6200 watt portable generator to use during power outages. What are the safety concerns such as rain, snow, how far from any structues must it be used, and can it be placed on a deck? Also would like to here any recommendations as to what model and...
How big of a Generator should I get?
[ 7 Answers ]
Well Hurrican season is rolling around again and this year, I am considering getting the power generator to add to my supplies. My question is this. How much power do I need to power my refrigerator and a few lights and fans? My new fridge has a 652 kWh/year power rating (from the yellow... View more questions Search
Add your answer here.
|