Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fluorescent light will not light on ceiling fan
[ 1 Answers ]
I have a model #357630 Renaissance Hampton Bay ceiling fan. For a good 6 months the light would come on all by it's self. Today, I took the canopy down and found that the receiver was burned and melted a little. First I tried to wire it without a receiver, I could get the fan to work but not the...
Fluorescent light fixture
[ 4 Answers ]
I have a problem my friend has a fluorescent light fixture when he turn on the lights they stay bright for a while and then they go dim. This is what I did so far I change the Ballast light clips and the blubs but I am still having the same problem. Is there anything I might be over looking ...
Fluorescent light not getting enough power from GFI?
[ 8 Answers ]
I have fluorescent lighting fixture under cabinet in kitchen containing two bulbs. Only one works when switched on, except when I reset GFI and remove plug from coffee maker on the same GFI outlet. GFI tests okay. If GFI is faulty, why does is still work to light one of the bulbs only and also...
New Fluorescent Light bulbs and their use
[ 9 Answers ]
I’m sure this has been asked … but I am looking at these 13Watt replacement bulbs that are 60 Watt replacements. Now, I have light fixtures in my house, which are all labeled with Use 60 Watt Maximum. Can I use a higher Fluorescent (and hence get more Light Output) into some of my darker... View more questions Search
|