Ask Experts Questions for FREE Help !
Ask
    Herb9z's Avatar
    Herb9z Posts: 10, Reputation: 1
    New Member
     
    #1

    Jun 18, 2008, 03:04 PM
    Fluorescent light and humidity
    My kitchen ceiling light is known to not work during periods of high humidity. Last year I replaced the sockets that the (2) bulbs get twisted into, and the problem seemed solved.

    However, during a recent about of high humidity, the two bulbs weren't working once again. Once the humidity subsided, it works. This now happens over and over this year.

    It's an old fixture, maybe 30 years. Can the ballast be affected by humidity?:confused:
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Jun 18, 2008, 04:24 PM
    The fixture has to be well grounded for the lamps to start. Particularly the metal reflector under the lamp.

    Also you can use petroleum jelly or dialectric grease on the tube pins.

    Check the lamp that the ballast supports. Older ballasts sometimes have a difficult time starting newer lamps which have less mercury. The ballast can be changed.
    Herb9z's Avatar
    Herb9z Posts: 10, Reputation: 1
    New Member
     
    #3

    Jun 19, 2008, 11:36 AM
    Quote Originally Posted by KeepItSimpleStupid
    Also you can use petroleum jelly or dialectric grease on the tube pins.
    Thanks. I had previously taken out each bulb and put it back in, to no good effect. That told me the contacts were not the problem.

    But today I switched bulbs and now everything works. That tells me it was a contact problem - even after only one year with new sockets and bulbs. Maybe then it really is due to humidity and lack of contact, made worse by kitchen fumes.

    So I put vaseline on the pins to try to keep moisture out. It usually works now - usually. Electricity is funny. I merely coated the pins then put the bulbs back in. Should I have tried to pack it in instead? Does the petroleum jelly conduct electricity?

    Yet another rainstorm is coming, that'll be the test. Thanks again.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    Jun 19, 2008, 12:11 PM
    Dialectric grease is a better choice. Just lightly coat the pins. I doubt the Jelly conducts electricity well. This contact enhancer Stabilant 22 has been know to work. It was marked as Tweek many years ago when I first got my bottle.
    bilsherp's Avatar
    bilsherp Posts: 1, Reputation: 1
    New Member
     
    #5

    Sep 15, 2012, 09:39 AM
    Wipe all bulbs carefully. Dust with baby powder lightly.
    Replace
    Problem solved. Due to static on humid days

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fluorescent light will not light on ceiling fan [ 1 Answers ]

I have a model #357630 Renaissance Hampton Bay ceiling fan. For a good 6 months the light would come on all by it's self. Today, I took the canopy down and found that the receiver was burned and melted a little. First I tried to wire it without a receiver, I could get the fan to work but not the...

Fluorescent light fixture [ 4 Answers ]

I have a problem my friend has a fluorescent light fixture when he turn on the lights they stay bright for a while and then they go dim. This is what I did so far I change the Ballast light clips and the blubs but I am still having the same problem. Is there anything I might be over looking ...

Fluorescent light not getting enough power from GFI? [ 8 Answers ]

I have fluorescent lighting fixture under cabinet in kitchen containing two bulbs. Only one works when switched on, except when I reset GFI and remove plug from coffee maker on the same GFI outlet. GFI tests okay. If GFI is faulty, why does is still work to light one of the bulbs only and also...

New Fluorescent Light bulbs and their use [ 9 Answers ]

I’m sure this has been asked … but I am looking at these 13Watt replacement bulbs that are 60 Watt replacements. Now, I have light fixtures in my house, which are all labeled with Use 60 Watt Maximum. Can I use a higher Fluorescent (and hence get more Light Output) into some of my darker...


View more questions Search