Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Electrical & Lighting   »   electrical equipment with coax lines connected backfeeding 40-60 volts through lines?

 
Question Tools Search this Question Display Modes
Question
 
 
#1  
Old Dec 13, 2007, 01:51 PM
Mtdn27
New Member
Mtdn27 is offline
 
Join Date: Dec 2007
Posts: 1
Mtdn27 See this member's comment history on his/her Profile page.
electrical equipment with coax lines connected backfeeding 40-60 volts through lines?

Hi I have a question for any electricians. I am a cable technician and do installations for Cable,Internet,& Voice in homes. What I have encountered a lot is electrical back-feed coming through the copper coax lines feeding from vcr's and tv's in the house which are plugged into electrical outlets. THis voltage is not coming from the outside cable system because with the outside lines and cable boxes disconnected anything plugged into the home wall outlets feeds between 30 to 80 volts back through the lines many times melting the insulation on ours lines. I usually notice electricity first from feeling the electricity then I will check with a FVD and or VOM. It seems to me as though the home has a bad ground or neutral and the cable lines are the path of least resistence but I am not an electrician so would like to know what the cause and effect are. Thank you
Edit/Delete Message

Reply With Quote
 
     

Answers
 
 
Old Dec 13, 2007, 03:02 PM   #2  
tkrussell
Electrical & Lighting Expert
tkrussell is offline
 
Join Date: Jan 2005
Posts: 4,487
tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.
I believe it is coming from ground faults in the home, and their system is not grounded properly, and/or there are neutral ties to grounds.

Since your system is grounded at the street, you should test with a voltage meter across the customer ground point and your cable before you coming in between these two. Those customers that give you more than 2 volts should not be connected and issued a warning that their system needs attention.
  Reply With Quote
 
     
 
 
Old Dec 14, 2007, 06:48 AM   #3  
Cobraguy
Junior Member
Cobraguy is offline
 
Join Date: Nov 2007
Posts: 140
Cobraguy See this member's comment history on his/her Profile page.
I wonder if this customer has the same handyman that was mentioned in another thread.

Comments on this post
labman agrees: The one I said keep away from your plumbing and heating too?
  Reply With Quote
 
     
 
 
Old Dec 15, 2007, 06:56 AM   #4  
Cobraguy
Junior Member
Cobraguy is offline
 
Join Date: Nov 2007
Posts: 140
Cobraguy See this member's comment history on his/her Profile page.
Yep labman! That's the one!
  Reply With Quote
 
     
 
 
Old Dec 15, 2007, 07:28 AM   #5  
tkrussell
Electrical & Lighting Expert
tkrussell is offline
 
Join Date: Jan 2005
Posts: 4,487
tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.tkrussell See this member's comment history on his/her Profile page.
The worst are the people that "Think" they know how to do something.

Give anyone that asks a question all the respect.

At least they are admitting they do not know.

And those that question the advice of someone that is not a pro.
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
tangent lines & secant lines dks2114 Math & Sciences 3 Dec 11, 2007 01:35 AM
Connecting Copper Supply Lines to Brass Supply Lines curt_green Plumbing 0 Nov 12, 2007 10:38 AM
Between the lines. JohnDoe9875 Criminal Law 0 Oct 22, 2007 03:18 PM
Boundary lines dee955 Relationships 1 Sep 24, 2007 02:04 PM
Lines Across TV jakesnake84 Television 1 Apr 12, 2005 07:57 PM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 11:56 AM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.