Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Electrical & Lighting   »   Is dedicated circuit for garbage disposal mandatory?

 
Question Tools Search this Question Display Modes
Question
 
 
#1  
Old May 8, 2008, 07:41 AM
pompopei
New Member
pompopei is offline
 
Join Date: May 2008
Posts: 16
pompopei See this member's comment history on his/her Profile page.
Is dedicated circuit for garbage disposal mandatory?

I have two questions:

1) does a garbage disposal need a separate circuit?

2) if it does not, can it share the same 20 amp circuit with the dishwasher?

Reply With Quote
 
     

Answers
 
 
Old May 8, 2008, 12:47 PM   #2  
mr500
Junior Member
mr500 is offline
 
mr500's Avatar
 
Join Date: Feb 2008
Location: Alabama
Posts: 154
mr500 See this member's comment history on his/her Profile page.
I believe a dedicated is required for both units (D/W and Dis) . But Im not 100% positive on that. Would be nice if it were I think.

Mike
  Reply With Quote
 
     
 
 
Old May 9, 2008, 08:11 AM   #3  
donf
Printers & Electronics Expert
donf is offline
 
donf's Avatar
 
Join Date: Aug 2007
Location: Tidewater, Virginia
Posts: 1,791
donf See this member's comment history on his/her Profile page.donf See this member's comment history on his/her Profile page.
Home or commercial use?

***********************************

No, I disagree.

1) You may not attach a disposal to either of the two mandatoy 20 Amp branch circuits designated for the kitchen counters.

2) You may attach a disposal to a general lighting branch circuit or a individual branch circuits.

15 Amp should be sufficient but 20 amp may help smooth out the motor operation.

I can't find the code cites but I will look for them.
  Reply With Quote
 
     
 
 
Old May 9, 2008, 03:09 PM   #4  
mr500
Junior Member
mr500 is offline
 
mr500's Avatar
 
Join Date: Feb 2008
Location: Alabama
Posts: 154
mr500 See this member's comment history on his/her Profile page.
Quote:
Originally Posted by donf
***********************************

No, I disagree.

1) You may not attach a disposal to either of the two mandatoy 20 Amp branch circuits designated for the kitchen counters.

2) You may attach a disposal to a general lighting branch circuit or a individual branch circuits.

15 Amp should be sufficient but 20 amp may help smooth out the motor operation.

I can't find the code cites but I will look for them.

Don...He never said he was attaching it to a plug at the counter for power.

I think both should be on separate circuit. Dishwasher and Disposal.

It is highly recommended from what i gather
  Reply With Quote
 
     
 
 
Old May 9, 2008, 04:17 PM   #5  
stanfortyman
Electrical & Lighting Expert
stanfortyman is offline
 
Join Date: Feb 2008
Posts: 831
stanfortyman See this member's comment history on his/her Profile page.
It is even more common to have the disp and DW on a shared 20A circuit.
  Reply With Quote
 
     
 
 
Old May 9, 2008, 04:26 PM   #6  
donf
Printers & Electronics Expert
donf is offline
 
donf's Avatar
 
Join Date: Aug 2007
Location: Tidewater, Virginia
Posts: 1,791
donf See this member's comment history on his/her Profile page.donf See this member's comment history on his/her Profile page.
Stan,

Thanks, no kidding, I just found the code section I was looking for.

I agree that the FD and the DW can exist on the same outlet, if they are using cord attachment. The can also co-exist on a shared 20 amp branch circuit, from the CB to junction box and then hardwired to the appliances.

However, according to 210.52(B) (2) also states what can be on either of the mandatory two 20 amp Branch Circuits.
  Reply With Quote
 
     
 
 
Old May 9, 2008, 10:48 PM   #7  
Washington1
Electrical & Lighting Expert
Washington1 is offline
 
Join Date: Jun 2007
Posts: 540
Washington1 See this member's comment history on his/her Profile page.
Read the manufactures instructions. It may be a requirement to have them on dedicated circuits per NEC 110.3.

With todays appliances pulling over 10 apms, I would dedicate the dishwasher and disposal.
  Reply With Quote
 
     
 
 
Old May 10, 2008, 02:08 PM   #8  
pompopei
New Member
pompopei is offline
 
Join Date: May 2008
Posts: 16
pompopei See this member's comment history on his/her Profile page.
Thanks everyone very much for help. I decided to dedicate a 20-amp circuit to DW and another 15 amp to disposal to be on the safe side. Problem is, I ran out of slots in the panel for other needs. But that will be tomorrow's problem. Thanks a lot.
  Reply With Quote
 
     
 
 
Old May 10, 2008, 04:33 PM   #9  
Stratmando
Ultra Member
Stratmando is offline
 
Stratmando's Avatar
 
Join Date: May 2007
Location: Florida Keys
Posts: 3,671
Stratmando See this member's comment history on his/her Profile page.Stratmando See this member's comment history on his/her Profile page.
They do make a double breaker that fits in 1 space. They can't share a neutral.
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
trace a dedicated electrical circuit dan13 Electrical & Lighting 3 Dec 17, 2007 04:58 AM
Dedicated circuit for refrigerator LocoE Electrical & Lighting 8 Sep 25, 2007 08:05 AM
Garbage disposal ShirleyGoris Appliances 0 Dec 31, 2006 06:58 AM
garbage disposal Tonyac Plumbing 3 Mar 14, 2006 04:15 AM
garbage disposal jduke44 Plumbing 5 Sep 14, 2005 04:37 PM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 11:49 AM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.