Ask Experts Questions for FREE Help !
Ask
    wareagle's Avatar
    wareagle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 15, 2009, 02:51 PM
    Converting 220v 4-wire outlet to 3-wire
    I bought a new drier with the "inverted V" 3-wire power plug. The drier outlet I have is like an overgrown version of a 110 grounded outlet, with 2 vertical 110 prongs and a ground socket. I bought a V-socket to accommodate the new drier plug, but when I shut off the breaker and opened up the old socket, I found red and black hot wires, and apparently a bare AND a white ground wire. My question: Do I need to hook BOTH the white and bare wires to the ground terminal, or just ignore the white wire altogether?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    May 16, 2009, 06:18 AM
    Well first off that plug and receptacle you had was wrong for a dryer, unless it was a true 240v like a European model. The receptacle you had was a straight 240v-30A version.

    You should replace the receptacle with a 4-wire dryer receptacle and get the matching cord for your dryer.
    The dryer does not come with a cord from the factory, you put the proper cord on it. So whoever put that three prong cord on it assumed it was correct.
    ohb0b's Avatar
    ohb0b Posts: 215, Reputation: 14
    Full Member
    		  
    #3

    May 16, 2009, 09:34 AM
    Also, when you connect the dryer to a 4-wire receptacle, remember to remove the bonding jumper from the ground to the neutral.
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Vintage stove- 3 wire 220v, what size wire? [ 1 Answers ]

We recently purchased a vintage Crosley range. The old wire was a 3-wire 220v, connected to terminals in the back- the black and red wires were actually 6 or so copper strands, and the white was a silver metal. My question is, what amperage do you think I need? Will 10 be enough? Thanks for your...

How to wire 220v Fasco heater ? [ 1 Answers ]

I have an older hot air (fan driven over coils) in wall heater. In is essentially new in a box never used for about 8 years. I want to use it now, but when I went to wire it up I can't figure out where the neutral should be connected to. The unit has a Black, Red and frame ground ready to be...

Connecting ground to 220v 3-wire outlet [ 8 Answers ]

I am trying to connect my bandsaw to an old-style 3-wire 220v dryer outlet (2 hot wires, 1 neutral). My bandsaw has no neutral wire. Do I connect the ground from the machine to the neutral socket?

240 volt four wire in 240 three wire outlet [ 1 Answers ]

I have a generator that has (2) 20 amp 110 outlets and (1) 240 outlet. The 240 outlet have receptacle for four wire plug but I want to use it in a three 930 wire 240 volt plug at other end. Is this a workable solution?

220V 3-wire dryer receptacle [ 2 Answers ]

I just moved in and the dryer won't heat. I'm trying to troubleshoot so the first thing I checked is the receptacle it's an old 3-wire. One leg shows ~238V the other shows ~116V is that normal?

View more questions Search