Add your answer here.
Check out some similar questions!
Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 13 Answers ]
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Fan works but light doesn't. Fixed and now the light works but fan doesn't [ 9 Answers ]
While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the...
Hampton bay ceiling fan-light works-fan doesn't [ 4 Answers ]
I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...
Bathroom fan/light: light works, fan doesn't [ 3 Answers ]
I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes...
Hampton Bay Remote Ceiling Fan - light works - no fan [ 1 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
View more Electrical & Lighting questions Search