Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan motor reverse wiring
[ 3 Answers ]
Greetings form a 1st poster. I have an old (50's ?) Hunter ceiling which doesn't have a reverse switch on it. How can this be done? Thanks, RNR
Ceiling Fan motor still noisey
[ 5 Answers ]
Help... I think I have ruled out the fan motor itself... Could it be something in how the outlet box is wired, or something else on the circuit? I am really baffled and am tired of taking down and putting up the fan every time I need to check something out. I have measured the voltage at both the...
Ceiling fan with light kit on separate switches
[ 1 Answers ]
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
Corrosion on a ceiling fan motor
[ 1 Answers ]
My fan powers up but does not spin. After taking the fan apart I saw that there was corrosion on a couple of coils and 2 wires are split. It looks as if the wires shorted out and flash burned a small part of the motor coils, along with the wires. Can this motor be fixed and/or made to work...
Ceiling Fan Motor Noise
[ 1 Answers ]
I have installed 4 ceiling fans (2 Hampton Bay and 2 Hunter) and experienced the same thing. A humming sound from the motors on all of them. I used 12G wiring and spliced into 12G existing wiring in the attic. The mfrs don't understand why - one has asked if I have enough power going to them. ... View more questions Search
|