Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3-speed fan control switch wire connection
[ 23 Answers ]
Inside housing case are two boxes. One box has #1,2,3,and letter L. The other box has 1 red wire glued in silicone. There are two cords running into housing case. A gray cord coming from fan's motor with 5 wires: White,yellow,blue,gray,green w/white stripe. A black cord (two prong plug) with...
Wiring for 5-speed fan control wall switch
[ 3 Answers ]
I have installed a ceiling fan/light fixture, however, am not sure as how to wire the wall switch, specifically the wiring for the 5-speed fan control. I am able to get the light to work, but not the fan. Look forward to your replies. Thank you
Celing Fan Speed Control switch replacement
[ 1 Answers ]
I am replaceing a fan speed control switch. It is a four wire pull switch that is marked "L", "1", "2" & "3" with wiring coming out of each location. The color of the wires are different than the switch I am replacing. How do I wire in the replacement switch?
Fan speed control switch wirung diagram
[ 1 Answers ]
I am replacing a fan speed control switch on a ceiling fan. There are four wires from the fan to be connected to the switch. I need to know which wire is connected to the L, 1, 2 or 3 position on the switch. I would appreiciate some help, please.
Wall Speed control on old ceiling fan install new with pull switch
[ 3 Answers ]
I have an old celing fan purchased in the 80's with a wall mount speed control knob. I purchased a Hampton Bay, Huntinton III 522-306 3 speed control with a pull chain. When installing the unit the fan does not work. I have a white wire, a black wire, a blue wire for the light and a ground... View more questions Search
|