I am trying to put in a box heater instead of my baseboard wire is to short can you

This is my first post, so thanks in advance for any help. I'm finishing my basement & am installing a pair of Marley electric baseboard heaters in parallel. I've got the basics done: double 20 amp breaker, 12ga wire, Double line break thermostat. Here's the issue: The units will accept left or...

There were two baseboard heaters in a mobile home. One was removed, not sure how the wires were capped off. The thermostat is wall mounted. The Base heater is wall mounted near the floor The heater remaining worked for two years and then stopped working. First I would like to check the thermostat...

Hey All, Maybe you can help. I'm installing four 240V baseboard heaters to a room in the back of my house with a total amp rating of 17.7 amps. I intended to use a double pole 20 amp breaker and 12/2 romex, but my brother says I should use a 30 amp breaker and 10/3 wire. The furthest heater...

I have baseboard heaters along two walls in the main room of my apartment. There is an old style thermostat that has ascending numbers on it but really just clicks on or off. I can take the knob off but the cover plate is glued to the wall, and the only writing on the unit says "Comfort." Anyway,...

I have baseboard heaters along two walls in the main room of my apartment. There is an old style thermostat that has ascending numbers on it but really just clicks on or off. I can take the knob off but the cover plate is glued to the wall, and the only writing on the unit says "Comfort." Anyway,...