Ask Experts Questions for FREE Help !
Ask
    jaybird's Avatar
    jaybird Posts: 1, Reputation: 1
    New Member
     
    #1

    May 3, 2006, 11:49 PM
    Adding a GFI
    In my breaker box for my pool pump, there is a GFI outlet. Would it be possible to daisy chain another GFI outlet off it? I am wanting to put an outlet about sixty feet from where the box is at by my pool.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    May 4, 2006, 02:19 AM
    Another outlet can be connected to either a GFI breaker or outlet. A pool requires an outlet no closer than 10 feet from the water edge, and no farther than 20 feet.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adding name to Car Title [ 6 Answers ]

Can I add my husbands name to my car title, or anyone else's name for that matter?

Adding customer [ 7 Answers ]

I have been learning and building an ms access database. There version is 2002. I have all my tables built and the forms built. I wanted to be able to add a customer so that it would get included in a drop down box. I can add it the problem is I have to close the form and reopen it so I can see it...

Adding main flr w/r [ 1 Answers ]

I am adding a powder room c/w toilet and basin. I was told that if I use 2" piping all the way up to the basin tail piece that this would act as a vent if tied into the toilet drain. Will this work properly?The toilet is on the main floor and it will be about 10 feeet away from a main sanitary...

Adding a john [ 3 Answers ]

I would like to add a toilet to a 2000 sqft metal building that has only used for storage. I would need to put in septic system and the dwelling is single story building on a concrete slab. Will the toilet need an air/roof vent? Any pointers? Donka! P2E

Adding subpanel [ 1 Answers ]

I'm converting my garage to a woodshop, so I need 220 service for the table saw and band saw, and potentially later the dust collector and compressor. Also I want to run a new circuit for lights, plus two 110 outlet circuits. That's a possible four 220 and three new 110 circuits. I've got a...


View more questions Search